Real basic beginning question

[rcg]

I want to use my 6 meg sony camera for some astro shots. I assume the easiest way to start is with eyepiece projection (I'll be doing wide field if that makes a difference). The best I can gather is I need to figure out an adapter to attach my camera to my eyepiece. The more secure the better. Then I assume I'll use the timer to reduce vibration, and program for longest exposure time. I also assume starting with the moon is a good beginning. This is a basic setup no frills, am I on the right track? Would appreciate any suggestions. I am just starting so knowledge and terminology understanding and equipment is in the acquisition phase, except for my telescope and camera.

[Jim Fusco]

There are basically 2 types of adapters, one that holds the eps and screws to the camera and one that holds the camera to the eps. I like the naglers T6's because of the large elements. As you find it's a PIA and very challenging. It's tuff getting the camera in focus and you will need to do a number of shots in and out of focus. The type I have is the type that holds the eps. You will need to get the eps as close to the camera lens as you can. This setup should be done inside. Next is getting align and balance with the camera's weight.
Now long term imaging I never did yet. To do or try I think a low power 2" eps and I suggest a camera mount type of holder. Also you should get a ac/dc power supply. I only do planets, lunar. With my refractor I'm able to use the power-mates and the TV's T6 naglers 11- 2.6mm. As the camera's get better this gets a little easier. I'm on my second camera now. My first was a C4040z now a S3 cannon. I like the oly because it was a little lighter and smaller lens. But the live shots like your and the S3 make it easier, besides the remote shooting software.